Tektronix TBS2000B Series Digital Oscilloscope

The TBS2000B Series of Oscilloscopes with a 9-inch WVGA display, 5 million point record length and 2 GS/s sample rate, capture and display significantly more signal to help you debug and validate the designs faster. Easily and confidently analyze your signals with new on-waveform cursor readouts and 32 automated measurements, each with informative tips. The TekVPI® probe interface supports traditional passive BNC probes, but also enables wide application coverage with the latest active voltage probes and current probes.

Category: Test & Measuring Instrument

SKU: Digital Oscillo

Features

Key performance specifications

2 and 4 analog channel models
200 MHz, 100 MHz, and 70 MHz bandwidth models up to 2 GS/s sampling rate
5 M record length on all channels
5 year warranty

Key features

9-inch WVGA color display with 15 horizontal grids shows 50% more signal
TekVPI probe interface supports active, differential, and current probes with automatic scaling and units
New front-end design enables more accurate measurements
32 automated measurements, and FFT function for quick waveform analysis
Search and Mark features for easy identification of events that occur in the acquired waveform
HelpEverywhere® provides helpful on-screen tips for new users
Built-in Scope Intro handbook provides operating instructions and oscilloscope fundamentals
The instrument user interface and the front panel overlay is translated into 10 languages

Connectivity

USB 2.0 host port on the front panel for quick and easy data storage
USB 2.0 device port on rear panel for easy connection to a PC
10/100BASE-T Ethernet port for remote control over LAN
Wi-Fi interface provides wireless communications capability support1

Education

Courseware function presents lab exercise guidance on the display
Fully compatible with TekSmartLab lab management software for education
Autoset, Cursors and Automated measurements can be disabled to help educators to teach basic concepts to students

Model overview

Models	TBS2072B	TBS2074B	TBS2102B	TBS2104B	TBS2202B	TBS2204B
Analog Channels	2	2	2	2	2	4
Bandwidth	70 MHz	70 MHz	100 MHz	100 MHz	100 MHz	200 MHz
Max Sample Rate	2 GS/s - Half Channel 1 GS/s - All Channels	2 GS/s - Half Channel 1 GS/s - All Channels	2 GS/s - Half Channel 1 GS/s - All Channels	2 GS/s - Half Channel 1 GS/s - All Channels	2 GS/s - Half Channel 1 GS/s - All Channels	2 GS/s - Half Channel 1 GS/s - All Channels
Record length	5 M points	5 M points	5 M points	5 M points	5 M points	5 M points

Vertical system analog channels

Hardware bandwidth limits: 20 MHz

Input coupling: DC or AC

Input impedance: 1 MΩ ± 1 %, 13 pF ± 1.5 pF

Input sensitivity range: 1mV/div to 10 V/div

Vertical resolution: 8 bits

Maximum input voltage, 1 MΩ: 300 VRMS, Installation Category II; with peaks ≤ ±450 V

Acquisition modes

Sample: Acquire sampled values.
Peak Detect: Captures glitches as narrow as 3.5 ns at all sweep speeds.
Average: From 2 to 512 waveforms included in average.
Hi-Res: Averages multiple sample of one acquisition interval into one waveform point.
Roll: Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 40 ms/div.

Math modes

All units:

Ch 1 - Ch 2

Ch 2 - Ch 1

Ch 1 + Ch 2

Ch 1 X Ch 2

FFT

4 channel units:

Ch 3 - Ch 4

Ch 3 + Ch 4

Ch 4 - Ch 3

Ch 3 X Ch 4

DC balance: ± (1 mV +0.1 div)

DC gain accuracy: ± 2% 10 V/div through 5 mV/div; ± 3% typical 1 mV/div

DC voltage measurement accuracy average mode

Average of > 16 waveforms: ±((DC Gain Accuracy) X |reading - (offset - position)| + Offset Accuracy + 0.11 div + 1 mV)

Delta Volts between any two averages of ≥16 waveforms acquired with the same oscilloscope setup and ambient conditions: ±(DC Gain Accuracy X |reading| + 0.08 div + 1.4 mV)

Vertical position range: ± 5 divisions

Vertical offset ranges

Volts/Div setting	1 MΩ, Input
1 mV/Div to 50 mV/Div	±1 V
51 mV/div to 505 mV/div	±10 V
510 mV/div to 10 V/div	±100 V

Analog bandwidth, DC coupled

200 MHz models:: DC to >200 MHz
100 MHz models:: DC to ≥100 MHz
70 MHz models:: DC to ≥70 MHz

Common mode rejection ratio (CMRR), typical: 100:1 at 60 Hz, reducing to 10:1 with 50 MHz sine wave with equal Volts/div and coupling settings on each channel.

Channel-to-channel isolation

TBS2072B, TBS2074B	TBS2102B, TBS2104B	TBS2202B, TBS2204B
≥100:1 at ≤70 MHz	≥100:1 at ≤100 MHz	≥100:1 at ≤200 MHz

Horizontal system analog channels

Maximum duration of time captured at highest sample rate (all channels): 5 ms

Time base range: TBS220xB, TBS207xB, TBS210xB: 1 ns/div to 100 sec/div
Seconds division range: TBS207xB, TBS210xB, TBS220xB: 1 ns/div to 100 sec/div in a 1-2-4 sequence

Time-base delay time range: -15 divisions to 5000 s

Deskew range: ±100 ns

Time base accuracy: ±25 ppm over any ≥1 ms interval

Trigger system

Trigger modes: Auto, Normal, and Single

Trigger holdoff range: 20 ns to 8 s

Trigger types

Edge: Positive or negative slope on any channel. Coupling includes DC, HF reject, LF reject, and noise reject.
Pulse width: Trigger on width of positive or negative pulses that are >, <, =, or ≠ a specified period of time.
Runt: Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.

Trigger coupling analog channels: DC, Noise Reject, High Freq Reject, Low Freq Reject.

Sensitivity, edge–type trigger, DC coupled

Trigger Source	Sensitivity
Analog inputs	0.4 division from DC to 50 MHz 0.6 divisions >50 MHz to 100 MHz 0.8 divisions >100 MHz to 200 MHz

Trigger Source

Sensitivity

Analog inputs

0.4 division from DC to 50 MHz

0.6 divisions >50 MHz to 100 MHz

0.8 divisions >100 MHz to 200 MHz

Trigger level ranges: Input channels: ± 4.90 divisions from center screen

Data storage

Nonvolatile memory retention time, typical: No time limit for Front Panel Settings, saved waveforms, setups, and calibration constants.

Real-Time clock: A programmable clock providing time in years, months, days, hours, minutes, and seconds.

Waveform measurements

Cursors: Time, amplitude, and screen.

Automated measurements: 32, of which up to six can be displayed on-screen at any one time. Measurements include: Period, Frequency, Rise Time, Fall Time, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Phase, Positive Overshoot, Negative Overshoot, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle RMS, Positive Pulse Count, Negative Pulse Count, Rising Edge Count, Falling Edge Count, Area, Cycle Area, Delay FR, Delay FF, Delay FR, and Delay RR.

Gating: Isolate the specific occurrence within an acquisition to take measurements on, using either the screen, between waveform cursors or full record length.

Waveform math

Arithmetic: Add, subtract, and multiply waveforms.

FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris.

Remote control software

Web page: Built-in web page enables remote control of horizontal and vertical scale, trigger settings, and measurements. Allows waveform and image save to USB flash drive.

Display system

Display type: 9 inch (228 mm) wide format liquid crystal TFT color display.

Display resolution: 800 horizontal by 480 vertical displayed pixels (WVGA).

Waveform styles: Vectors, Variable Persistence, and Infinite Persistence.

Graticules: Grid, None.

Format: YT and XY.

Input output ports

USB 2.0 high-speed host port: Supports USB mass storage devices, Wi-Fi dongle, One port available on rear panel and one on front panel.

USB 2.0 device port

USB 2.0 high-speed device port

Device port: Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB with a TEK-USB-488.
Compatible USB-WIFI dongles: NETGEAR WNA1000M, WNA3100M, D-LINK DWA-131, TP-LINK TL-WN823N

LAN port (Ethernet): RJ-45 connector, supports 10/100BASE-T

Probe compensator

Amplitude: 5 V
Frequency: 1 kHz

Kensington-style lock: Rear-panel security slot connects to standard Kensington-style lock.

Power source

Power source voltage: 100 to 240 VAC RMS ±10%

Power source frequency: 47 Hz to 63 Hz (100 to 240 V); 360 Hz to 440 Hz (100 to 132 V)

Power consumption: 80 W maximum

(0)

Features

Key performance specifications

Key features

Connectivity

Education

Model overview

Vertical system analog channels

Horizontal system analog channels

Trigger system

Data storage

Waveform measurements

Waveform math

Remote control software

Display system

Input output ports

USB 2.0 device port

Power source

ATCL Installs a TQ Branded Subsonic Wind Tunnel at Military Institute of Science & Technology (MIST), Mirpur, Dhaka

ATCL Installs a Swiss Made Walter+bai Branded Universal Testing Machine at JUST, Jashore

Tektronix TBS2000B Series Digital Oscilloscope

Features

Key performance specifications

Key features

Connectivity

Education

Model overview

Vertical system analog channels

Horizontal system analog channels

Trigger system

Data storage

Waveform measurements

Waveform math

Remote control software

Display system

Input output ports

USB 2.0 device port

Power source

Related Products

Tektronix (Keithley) 3390 Arbitrary Waveform/Function Generator

Tektronix TBS1000C Series Digital Oscilloscope

Tektronix 6 Series B Mixed Signal Oscilloscope

GwInstek Digital 4- Channel Oscilloscope GDS-2204E

ATCL Installs a TQ Branded Subsonic Wind Tunnel at Military Institute of Science & Technology (MIST), Mirpur, Dhaka

ATCL Installs a Swiss Made Walter+bai Branded Universal Testing Machine at JUST, Jashore